ADT® Authorized Dealer Serving the entire Palm Springs & Palm Desert area
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your Palm Springs Property

Homeowners must defend against various risks like burglary, flooding, and fire. But what about a risk that you can’t see or smell? Carbon monoxide is different from other dangers because you might never be aware that it’s there. Despite that, implementing CO detectors can effectively shield yourself and your household. Learn more about this hazardous gas and where to place carbon monoxide detectors in your Palm Springs property.

What Is Carbon Monoxide?

Referred to as the silent killer due to its lack of color, taste, or odor, carbon monoxide is a commonly found gas caused by an incomplete combustion of fuels. Any fuel-consuming appliance like a fireplace or furnace can create carbon monoxide. Although you typically won’t have problems, issues can present when an appliance is not frequently inspected or appropriately vented. These missteps may cause a proliferation of this dangerous gas in your interior. Generators and heaters of various types are the most common reasons for CO poisoning.

When subjected to minute concentrations of CO, you might experience fatigue, headaches, dizziness nausea, or vomiting. Continuous exposure to higher amounts may cause cardiorespiratory arrest, and even death.

Tips On Where To Place Palm Springs Carbon Monoxide Detectors

If you don’t own at least one carbon monoxide detector in your interior, get one now. If possible, you should have one on each level of your home, and that includes basements. Here are some recommendations on where to place carbon monoxide detectors in Palm Springs:

  • Put them on each level, particularly in areas where you utilize fuel-burning appliances, including fireplaces, furnaces, water heaters, and gas dryers.
  • Always install one no more than 10 feet away from sleeping areas. If you only install one CO detector, this is the place for it.
  • Position them about 10 to 20 feet away from potential CO sources.
  • Do not affix them immediately above or beside fuel-utilizing appliances, as a non-threatening amount of carbon monoxide may be discharged when they turn on and prompt a false alarm.
  • Fasten them to walls at least five feet above the floor so they can sample air where inhabitants are breathing it.
  • Avoid using them beside windows or doors and in dead-air areas.
  • Install one in areas above garages.

Check your CO detectors regularly and maintain them according to manufacturer instructions. You will typically have to replace them every five to six years. You should also ensure any fuel-utilizing appliances are in in optimal working condition and have adequate ventilation.