Categories

False alarms and system glitches can be frustrating, and even worse, could prevent your home’s security from working how it should. Luckily, most problems, from dead batteries to false alarms, are straightforward to correct. Take a look at our suggestions for troubleshooting your home alarm system in Palm Springs. We’ll help keep your household safe and your system running the way it should.

Test Your Home Security System In Palm Springs

One of the most sensible ways to troubleshoot your property’s security is to test it! The latest systems permit you to put them in test mode to keep you from prompting an emergency response from monitoring agents. After switching to test mode, do the following:

• Arm your system as you normally would when you exit your home.
• Open a door or window protected by a contact sensor, or try to trip another sensor. Close the window or door so it doesn’t trigger the alarm as you leave test mode.
• Permit the alarm to go off for 60 seconds to ensure communications with the security provider and to create an entry in the alarm activity log.
• Proceed to test devices as you wish
• Inspect the systems’s activity log to validate that everything’s working.

Don’t worry, monitoring agents will be able to see that your alarm system is being tested. Be sure to switch out of test mode when you’re done. It’s smart to test monthly or anytime you adjust your home’s phone or internet service.

Evaluate The Position And State Of Motion Sensors

Although an crucial element of your alarm system, motion detectors are notorious for false alarms. Do your part to prevent them with a few simple troubleshooting steps.

• Conduct a visual inspection. Are there items that could shift within the sensor’s detection zone, like a window treatment taken by a breeze?
• Is the sensor covered in dust? Dirt, cobwebs, and debris can result in malfunctions. Check to confirm the sensor is clean.
• Does the motion detector come with pet immunity you can activate? Some models can be configured to disregard pets up to 100 pounds.
• When was the battery replaced? A nearly depleted battery might affect performance or lead to false alarms.
• Is a heat source impacting the sensor? Excessive heat from a fireplace, direct sun, or something else can cause an alarm.

Keep Batteries On Hand And Look Out For Low Battery Signals

One of the great things about modern home security systems is that they’ll notify you when batteries are getting low. If your system is equipped with a control panel or app, you’ll often discover alerts there. Depending on your system, you could detect an intermittent beep when batteries are low. 

Contact sensors, motion detectors, smoke detectors, and other wireless devices have batteries that will have to be replaced every so often. It’s best to keep batteries ready and create a replacement schedule. Many systems also have a backup battery for the central control panel. This battery helps keep your system functioning if your power goes out and should recharge itself once power is restored. If it doesn’t recharge, you will need to replace it.

Troubleshooting Is Easy With ADT Home Security In Palm Springs 

As the leading name in home security, ADT builds systems that offer unrivaled protection and functionality. Switching to test mode is simple through MyADT.com or the ADT+ app, and you’ll always be sent notifications when a sensor battery is nearing depletion. Contact Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system perfect for your Palm Springs home and family. Call (760) 230-3527 or submit our form today!