One perk of having your home security system hooked up by professionals is that you rarely need to concern yourself with it. Even so, there will likely be times where you need to reset your alarms in Palm Springs. If you use a smart command panel, your system reset normally requires just a couple taps of the touchscreen after common events like false alarms and battery changes.
Check Your Instruction Manual Before Attempting An Alarm Reset
A word to the wise before you begin to reset your Palm Springs home security system, check your manual prior to proceeding. You’ll never want to compromise your system due to pressing the wrong button. Additionally, your system could change if you upgraded from a numbered keypad to a modernized touchscreen interface. Keep in mind that if you’re unable to figure out how to reset your system, don't worry as you can always reach out to the experts.
Resetting Your Palm Springs Home Security System After A False Alarm
Typically, a false alarm happens as a result of an accidentally tripped sensor. You are able to utilize the control panel or bring up your ADT smartphone app and touch the shield image and type in your security code to switch off the system when this occurs. You may be contacted by your monitoring professionals, but just tell them it was a false alarm.
Tips To Reset Your Alarm Following A Power Outage In Palm Springs
When you lose power due to a storm or other event, you may start to hear a repeated, high-pitched beep from your alarm’s central interface. That indicates that the alarm is running off the backup battery. To reset the alarm and stop the steady beeps, you need to deactivate and reactivate your system.
However, if your power outage lasts for prolonged time frame, you might need a complete reset of your home’s security. Pay careful attention to the directives in the manual -- usually by putting in your unique passcode and hitting the designated button twice -- and you should be back in business. You might keep hearing chirps from the backup power, as it’s possible it won’t end until the battery charges entirely. Call your home security agent if you are still having difficulties with your ADT controls at least 20 hours after your power is back on.
How To Reset Your Home Security System After Switching Out A Battery
There will be infrequent times when you must switch out a battery in one of the devices in your security installation. In order to accomplish this, you want to set your home’s defense to test mode so you prevent setting off an accidental alarm. Once the new battery is put in place, remove the alarm out of Test Mode and resume your usual settings. If the command center doesn't notice the piece of equipment or the battery indicator is still on, you could need a whole system reset.
Tips to Reset Your Palm Springs Security System When Adding Or Removing Someone
The addition and deletion of people can be accomplished on your ADT Command interface and your ADT mobile app. You won’t need a system reset when deleting or adding users. With that being said, if you find yourself moving to a new house that already has an ADT alarm system, you'll want to contact your home security professional at (760) 230-3527 to start a new service. The installer will visit your property to replace components, set up more devices (if needed), and perform a full reset.
A Well-Designed Security System Is Only A Call Away
Figuring out how to reset a home security system in Palm Springs can be a challenge if it doesn’t have clear instructions and features. If you’re ready to get your functional and powerful alarm system, dial (760) 230-3527 or send in the form below. We’ll be pleased to design the right security system for your needs.